01.To Work On Auto desk Fusion 360
I used a line from sketch option to draw and then use sketch dimensions to give dimensions to the line.
Then used spline option and then free spline option to give a curve to the sketch.
give a curve as required
In modifying option select revolve option, then selected profile and axis and operation option selected New body.
after done with profile and axis selection gave an angle of 360 degree
In construction, option select Offset Plane and then select the plane ‘s upper surface as shown
select the plane as required then
then in body option at left side select the body and then make body 1 invisible
In sketch select circle option, In that select center diameter option
make a circle and by sketch, dimension selects the dimension of the circle.
In modify option select extrude
extrude the circle center
In the body option make the first
and select the upper and bottom surface of the body. In shell window inside thickness option give the measurement as require and in direction option select inside. Make the first body visible and hide the second body
In construction option select Offset Plane
Then select the plane dimensions
then hide the third body in the body option
In sketch option select project/include. In that select projection and select the body and say ok
we get the projection of the body
Select line from the sketch option
draw two lines in the body projection
make them parallel by an option in (Sketch Palette) window at the right side.
Then give the dimensions by sketch dimensions in sketch option
select the extrude option from modify
select the profile, then in direction option select symmetric, then give the measurement, in operation option selected intersect
In modify option select pattern option in that select circular pattern
select pattern type body, select one object, select one axis, select type full, in quantity give a number as need and say ok.
do the say thing with another object
we get this structure
make all body parts visible.
. .. .
02. To Edit An Image On Photoshop
How to Make a Wood Burning Portrait
First, open the software photoshop
Then in files option select open to get an image
As the window appears select the image you want to edit and press the open button at right bottom side.
I had selected an image of burn wood to get an effect, as we want a portrait on wood burn effect.
as the same process open a portrait you want to edit.
As the portrait open, in image option select Adjustments.
In adjustments select Threshold.
Then in threshold window select the threshold level and press (ok)
Then select the brush tool
Select the black color
In the brush, setting window manage the hardness and size of the brush as required.
to remove the unwanted portion from the image.
In select option at top of window open color range.
In color range window, open (SELECT OPTION) in that select shadows and say ok.
By the (CROP TOOL), crop the background as required.
Then by (MOVE TOOL), select the portrait and drag it in the background
By FREE TRANSFORM TOOL adjust the size of the image.
you get this tool in the EDIT OPTION at top left corner.
or
by pressing [ Ctrl + T ] .
Adjust the image as you want.
Use the text tool as to give text in an image if required.
Select the Font Style, Font Size, and Color of your choice.
And adjust the text where you want it.
In Files option at left top corner go to [save as] or short cut is
[Shift + Ctrl + S ]
select it.
In Save As window,
In File name give it a name
and in Save as type select
JPEG(* JPG;*JPEG;*JPE)
and press save
. .. .
03. To Learn Coral Draw
To make a LOGO design
Start Coral Draw software and select new document
select ellipse tool and draw an ellipse
Fill the ellipse with color and disable the borderline
In object select transformations and select position
Select the size of the ellipse
Then select the radial position, select the copies amount and say apply
number of copies and say apply
you will get a square shape of an ellipse
In Effects Option select lens
Select the type of lens
Then select frozen and say apply
Then delete the square
Then ungroup the ellipse
Then make the borderlines visible
By right click of the mouse, in order option select
[To back of the page]
Separate the ellipse by dragging
Select the (selective fill tool)
Select the elliptical shade
Adjust the position of the shade as required
Select the color
The group both the ellipse
Then select drop shadow tool
Then select the presets and select the direction of the shadow
After applying the shadow
In file option select save as option
In save as window give the file a name and press save option
04. To make a design on sketch up
To make a design of the house
Start the sketch up software
Select a rectangle from the shape tool
Then use a pencil to draw a line
Then use the push-pull tool
Then pull the object
Select the line tool
Draw a cross line
By push pull tool push the surface
Use the orbit tool to rotate the design
Use line tool and draw a line to the edge of the object
Select an offset tool
Then select the surface and set the offset
Then by push-pull tool push the offset portion
Push the portion by [Push-Pull tool] which is straight about as required
Then pull the edge of the square by Push Pull tool
Use line tool and draw the line to join the two edges
By push pull tool push the surface slightly
By the line tool draw the line from the center
Pull the line by Push Pull tool as required
By push pull tool pull one side of the object as required
Then select the upper layer and by push-pull tool adjust the thickness of it
On the left side draw a square with help of the line tool
By the shape tool draw a window
Select it and push pull it
Do the same process to make some more window as required
Use the line tool to draw the roof
Then by push pull tool pull the roof sketch
This is how the model looks
Then by selecting the paint bucket option you can give the color to the model
As you select the paint bucket the paint window appear at the right you can select the color that you want
pick the color and just click on the model where you want to paint.
Ready model after the paint
05. To learn Solid Work
First select the [File] option
select [New]
As a new window appear select [Part] and press ok
In sketch option select circle tool to draw a circle
In line tool select center line to divide the circle and get the center point
Then use the center rectangle and draw a rectangle from the edge center point.
By the trim tool trim the outer portion of the rectangle which is outside the circle
In search option at top right search [ EQUATION ] command
In Equation window in global variable colum
type the daimeter of the circle and give it a unit and say ok
Select the smart dimension option to give the dimensions to the sketch
for example :- [ =var] and so.
Make a relation of the global variable with each and every dimension of the sketch
In linear sketch patter
select the circular pattern and select the entities of the rectangle
Then trim the remaining entities to make slots
In equation window
in global variable colum add the thicknes and its unit.
Select Features option
select the Extrude Boss/Base
and select the plane you want to extrude
In dimension window at left side add the global variable thicknes
If you change your global variable dimensions
your hole sketch will change the dimensions
In Files
select (SAVE AS) option
Give file name and file type
and press “ok” to save
Learning out comes
In “FUSION 360” i learned how to make an 3D designs and its simulations. And the animation through which we can know the weight lifting and stress level capacity of the object or the model we are going to build.
In “ADOBE PHOTOSHOP PS” i have learned about editing the image and we can give different effects to the image and can edit the background of the image we can give shades to the image and adjust the color tone of the image.
In “COREL DRAW” I learned to make our own design and to make a 2D design look 3D. To change the shades of the designs and to give them an effect.
In “SKETCH UP” i enjoyed building the model of the house we can create the model as we want and we can give the types of the textures to thee model.
In “SOLID WORK” i learned to make a sketch by the help of parametric equation and to create a global variable and to make a link of the dimensions with each other. In one global variable dimension change the hole sketch get changed.
rohan's blog 